Prepping a surface can be challenging and time-consuming, especially if you are removing layers of paint or other coating products that have been there for decades. Grinding, scraping, applying heat, and using chemicals are hard work because the same binders that cause paint to adhere also make it hard to remove. At the end of the day, it’s about finding the best machine to get the job done quickly and with as little dust as possible.


EcoQuip 2 EQp
Maximum Air Inlet Pressure              150 psi (10.3 bar, 1.03 Mpa)
Operating Temperature                     35°-110°F (1.6°- 43.3°C)
Recommended Compressor Size      185 CFM (5.24 m^3/min)
Abrasive Capacity                                220 lbs (100 Kg)
Dry Weight                                            220 lbs (100 Kg)
Wet Weight*                                        500 lbs (227 Kg)
Pressure Pot Volume                           2 cubic ft (56 L)
Air Inlet Connection**                        Universal, Chicago-style claw
Blast Connection***                           2 Lug Claw Coupler
Water Inlet Connection****            3/4 in garden hose connection
* Abrasive Capacity and wet weight using 80 grit garnet.
** A 3/4 inch Male NPT connects to the universal claw out of the system.
*** A 1.25 inch NPSM connects to the 2 lug claw coupler out of the system.
****Siphon kit is included with an available 3/4” NPT adapter kit